Name: TOSHIBA TLP5214A(TP,E(O
Brand: TOSHIBA
Availability: InStock

产品实拍图

本型号暂无已核对的专属实拍图。为避免图文不符，本页不放同系列近似图；如需实物照片，请联系销售获取本批次实拍。

引脚定义与内部结构

数据来源：原厂规格书引脚图

超过下表数值可能造成器件永久损坏，设计时请留余量。

特性	符号	额定值	单位
LED Input forward current	IF	25	mA
Input forward current derating (Ta ≥ 95°C)	∆IF/∆Ta	-1	mA/°C
Peak transient input forward current	(Note 1) IFPT	1	A
Peak transient input forward current derating (Ta	≥ 95°C) ∆IFPT/∆Ta	-25	mA/°C
Input power dissipation	PD	145	mW
Input power dissipation derating (Ta ≥ 95°C)	∆ PD /∆Ta	-5.0	mW/°C
Detector Positive input supply voltage	VCC1	-0.5 to 7	V
“H” peak output current Ta = -40	to 110 °C IOPH	-4.0	A
“L” peak output current	(Note 2) IOPL	+4.0	A
FAULT output current	IFAULT	8	mA
FAULT pin voltage	VFAULT	-0.5 to VCC1	V
Total output supply voltage	(VCC2-VEE)	-0.5 to 35	V
Negative output supply voltage	(VE-VEE)	-0.5 to 15	V
Positive output supply voltage	(VCC2-VE)	-0.5 to 35 - (VE-VEE)	V
Output voltage	VO	-0.5 to VCC2	V
Peak clamping sinking current	IClamp	1.7	A
Miller clamping pin voltage	VClamp	-0.5 to VCC2	V
DESAT voltage	VDESAT	VE to VE + 10	V
Output power dissipation	PO	410	mW
Output power dissipation derating (Ta ≥ 95°C)	∆ PO /∆Ta	-14.0	mW/°C
Common Operating temperature range	Topr	-40 to 110	°C
Storage temperature range	Tstg	-55 to 125	°C
Lead soldering temperature (10 s)	(Note 3) Tsol	260	°C
Isolation voltage (AC, 60 s, R.H. ≤ 60%)	(Note 4) BVS	5000	Vrms
and coupler should not exceed 1 cm.
pin on the photodetector side are shorted	together.

数据来源：原厂规格书

Characteristic	符号	测试条件	最小	典型	最大	单位
Capacitance input to output	CS Vs	= 0 V, f = 1 MHz	- 12	1.0 14	-	pF
Isolation resistance	RS R.H.	≤ 60 %, VS = 500 V	10	10	- TLP5214A	Ω

特性	符号	测试条件	最小	典型	最大	单位
(Unless otherwise	specified, Ta = -40 to	110 °C, VCC2 - VEE = 15	to 30 V, VE	- VEE =	0 V)
Input forward voltage	VF ―	IF = 10 mA, Ta = 25°C	1.4	-	1.7	V
Input capacitance	Ct ―	V = 0 V, f = 1 MHz, Ta = 25 °C	-	95	-	pF
		IFAULT = 1.1 mA, VCC1 = 5.5 V	-	0.2	0.4
FAULT low level output voltage	VFAULTL ―					V
		IFAULT = 1.1 mA, VCC1 = 3.3 V	-	0.2	0.4
			-	-	0.5
FAULT high level output current	IFAULTH ―					μA
			-	-	0.3
		VO = VCC2 - 4 V	-	-4.0	-1.2
		VO = VCC2 - 7 V	-	-6.5	-3.0
		VO = VEE + 2.5 V	1.2	3.5	-
		VO = VEE + 7 V	3	5.5	-
	IOLF ―	VO - VEE = 14 V	90	150	230	mA
High level output voltage	VOH 3	IO = -100 mA	VCC2-0.3	VCC2-0.1	-
Low level output voltage	VOL 4	IO = 100 mA	-	0.1	0.2	V
Clamp pin threshold voltage	VtClamp ―	―	-	2.5	-
Clamp low level sinking current	ICL ―	VO = VEE + 2.5 V	0.56	1.8	-	A
High level supply current	ICC2H 5	IO = 0 mA	-	2.4	3.8
Low level supply current	ICC2L 6	IO = 0 mA	-	2.3	3.8
Blanking capacitor charging current	ICHG 7	VDESAT = 2 V	-0.33	-0.24	-0.13
Blanking capacitor discharge	current IDSCHG 8	VDESAT = 7 V	10	49	-
DESAT threshold voltage	VDESAT ―	VCC2 - VE ＞ VUVLO-	5.9	6.5	7.5
	VUVLO + 9	VO ＞ 5 V	10.5	11.6	13.5
	VUVLO - 9	VO ＜ 5 V	9.2	10.3	11.1
UVLO hysteresis	UVLOHYS ―	―	-	1.3	-
Threshold input current (L/H)	IFLH 10	VCC2 = 30 V, VO < 5 V	-	2.6	6	mA
Threshold input voltage (H/L)	VFHL ―	VCC2 = 30 V, VO > 5 V	0.8	-	- TLP5214A TLP5214A	V

Peak output current: ±4.0 A (max)Supply current: 3.8 mA (max)Propagation delay time: 150 ns (max)

规格书为原厂公开资料，点击在新窗口打开下载。

常备现货、免费送样、支持小批量试产。报出用量与封装要求，当天给报价与交期。

手机端点号码直接拨号/唤起 QQ；电脑端点座机会唤起系统拨号应用，点 QQ 会打开企业QQ 对话窗口。