引脚定义与内部结构
| 引脚 | 符号 | 名称 |
|---|---|---|
| 7 | ANODE | |
| 3 | FAULT | |
| 5 | CATHODE | |
| 6 | ANODE | |
| 9 | V EE | |
| 11 | V OUT | |
| 15 | V LED |
数据来源:原厂规格书引脚图
关键参数速览
- 正向电流 IF
- 25
- 隔离电压 VISO
- 5000
- 电源电压 VCC
- −0.5 to 7
- 工作温度 TA
- −1
绝对最大额定值 Absolute Maximum Ratings(TA = 25°C)
超过下表数值可能造成器件永久损坏,设计时请留余量。
| 特性 | 符号 | 额定值 | 单位 |
|---|---|---|---|
| LED (Note Input forward current | IF | 25 | mA |
| Input forward current derating (Ta ≥ 95°C) | ∆IF/∆Ta | −1 | mA/°C |
| Peak transient input forward current | (Note 1) IFPT | 1 | A |
| Peak transient input forward current derating (Ta | ≥ 95°C) ∆IFPT/∆Ta | −25 | mA/°C |
| Input power dissipation | PD | 145 | mW |
| Input power dissipation derating (Ta ≥ 95°C) | ∆ PD /∆Ta | −5.0 | mW/°C |
| Detector Positive Input Supply Voltage | V CC1 | −0.5 to 7 | V |
| “H” peak output current Ta = −40 | to 110 °C IOPH | −4.0 | A |
| “L” peak output current | (Note 2) IOPL | +4.0 | A |
| FAULT Output Current | I | 8 | mA |
| FAULT Pin Voltage | V FAULT | −0.5 to V CC1 | V |
| Total Output Supply Voltage | (V −V ) CC2 EE | −0.5 to 35 | V |
| Negative Output Supply Voltage | (V −V ) | -0.5 to 15 | V |
| Positive Output Supply Voltage | (V −V ) CC2 E | −0.5 to 35 − (V −V E EE | ) V |
| Output voltage | VO | −0.5 to V CC2 | V |
| Peak Clamping Sinking Current | I | 1.7 | A |
| Miller Clamping Pin Voltage | V Clamp | −0.5 to V CC2 | V |
| DESAT Voltage | V | V to V + 10 | V |
| Output power dissipation | PO | 410 | mW |
| Output power dissipation (Ta ≥ 95°C) | ∆ PO /∆Ta | −14.0 | mW/°C |
| Common Operating temperature range | Topr | −40 to 110 | °C |
| Storage temperature range | Tstg | −55 to 125 | °C |
| Lead soldering temperature (10 s) | (Note 3) Tsol | 260 | °C |
| Isolation voltage (AC, 60 s, R.H. ≤ 60 %) | (Note 4) BVS | 5000 | Vrms |
| and coupler should not exceed 1 cm. | |||
| pin on the photodetector side are shorted | together. | 2026-04-07 |
数据来源:原厂规格书
安全与绝缘额定值(DIN EN/IEC 60747−5−5)
| Characteristic | 符号 | 测试条件 | 最小 | 典型 | 最大 | 单位 |
|---|---|---|---|---|---|---|
| Capacitance input to output | CS Vs | = 0 V, f = 1 MHz | - 12 | 1.0 14 | - | pF |
| Isolation resistance | RS R.H. | ≤ 60 %, VS = 500 V | 10 | 10 | - | Ω |
| Switching Characteristics | (Note) (Ta = −40 | to 110 °C, unless | otherwise | specified) | ||
| L → H | tpLH | IF = 0 → 10 | mA 50 | 85 | 150 | |
| H → L | tpHL | IF = 10 → 0 | mA 50 | 90 | 150 | |
| Output rise time (10−90 %) (Note 9) | tr | IF = 0 → 10 | mA - | 32 | - | |
| Output fall time (90−10 %) (Note | 9) tf | Cg = 25 nF IF = 10 → 0 | mA - | 18 | - | ns |
| Pulse with distortion (Note | 9) | tpHL−tpLH | | Duty = 50% IF = 0 ↔ 10 | mA - | - | 50 | |
| tpsk | IF = 0 ↔ 10 | mA −80 | - | 80 | ||
| DESAT Sense to 90% Delay | t DESAT(90%) | C DESAT = 100 pF, Rg = 10 Ω | - | 180 | 500 | |
| DESAT Sense to 10% Delay | t DESAT(10%) | R = 2.1 kΩ | - | 3.5 | 5 | μs |
| t DESAT(FAULT) | C DESAT = 100 pF, Rg = 10 Ω | - | 300 | 500 | ||
| 12 | Cg = 25 nF, VCC2 = 30 V | ns | ||||
| t DESAT(LOW) | R = 2.1 kΩ | - | 200 | - | ||
| DESAT Input Mute | t DESAT(MUTE) | F | 7 | 14 | - | |
| t | VCC1 = 5.5 | V 0.2 | 0.45 | 2 | ||
| CMH | ±35 | - | - | |||
| Transient Immunity | 13 to | VO (min) = 26 | V | |||
| CML | ±35 | - | - | |||
| Transient Immunity | VO (max) = 1 | V | ||||
| CL is less than 15 pF | which includes probe and | stray wiring capacitance. |
应用领域 Applications
获取报价 / 申请样品
常备现货、免费送样、支持小批量试产。报出用量与封装要求,当天给报价与交期。
销售直线(点击可直接拨打)📞0755-82811939点击拨打📞0755-82812373点击拨打📞0755-82811915点击拨打📞0755-82811193点击拨打企业 QQ(点击跳转对话)💬QQ 2850611261企业QQ 对接💬QQ 2355817597企业QQ 对接💬QQ 3002728093企业QQ 对接💬QQ 2355817598企业QQ 对接
手机端点号码直接拨号/唤起 QQ;电脑端点座机会唤起系统拨号应用,点 QQ 会打开企业QQ 对话窗口。
